The Garmin GPS 35 TracPak is a complete GPS receiver and embedded antenna designed for a broad spectrum of OEM (Original Equipment Manufacturers) system applications. Based on the proven technology found in other Garmin 12–channel GPS receivers, the GPS 35 will track up to twelve satellites at a time while providing one-second navigation updates and low power consumption. Its far-reaching capability meets the sensitivity requirements of land navigation as well as the dynamics requirements of high-performance aircraft.
The GPS 35 TracPak design utilizes the latest technology and high-level circuit integration to achieve superior performance while minimizing space and power requirements. Utilizing Garmin's own proprietary chipset, all critical components of the system including the RF/IF receiver hardware and the digital baseband are designed and manufactured by Garmin to ensure outstanding quality and capability.
The GPS 35 TracPak is housed in a black, water-resistant case and designed to withstand rugged operating conditions. While the GPS 35 TracPak is designed as a "plug 'n play" GPS solution, the minimum system must provide a source of power and a clear view of the GPS satellites. The system may communicate with the GPS 35 via two RS-232 compatible bi-directional communication channels. Internal memory backup allows the GPS 35 to retain critical data such as satellite orbital parameters, last position, date, and time.
GPS 35 LVC — Attached 10 foot power/data cable with bare wire ends. Accepts power from unregulated low voltage power supplies between 3.6 and 6 VDC. Asynchronous serial data interfaces via 2 serial ports with CMOS voltage level outputs, RS-232 polarity.*
GPS 35 LVS — Attached 10 foot power/data cable with bare wire ends. Accepts power from unregulated low voltage power supplies between 3.6 and 6 VDC. Asynchronous serial data interfaces via 2 serial ports with true RS-232 voltage level outputs.*
GPS 35 HVS — Attached 5 meter power/data cable with bare wire ends. Accepts power from unregulated high voltage power supplies between 6 and 40 VDC. Asynchronous serial data interfaces via 2 serial ports with true RS-232 voltage level outputs.*
GPS35 PC — Attached 10 foot power/data cable with female DB-9 serial connection, ready to attach to your PC. Additional 8 foot power cable extension from the DB-9 connector terminates in a cigarette lighter plug for easy application of power supply voltage between 6 and 40 VDC. Asynchronous serial data interface via a single serial port with true RS-232 voltage level output.* **
*All serial inputs on all versions are compatible with either true RS-232 or TTL/CMOS voltage levels. Port 1 uses NMEA 0183 data format. Port 2 transmits binary position and raw measurement data and receives RTCM SC-104 differential corrections data, message types 1, 2, 3, and 9.