The first truly all-digital audio panel, the GMA 350H introduces a number of new technologies to the helicopter cockpit, including Telligence™ Voice Command, 3-D audio processing and advanced auto squelch.
Listen in Virtual 3-D
Advanced processing in the GMA 350H adjusts audio in the headset to mimic how the human ear normally hears and registers sounds in space. 3-D Audio makes it seem like different audio sources are coming from different directions, making it easier to distinguish one source from many. For example, COMM 1 will seem like it's coming from the left while COMM 2 will seem like it's coming from the right.
Operate Hands Free
With built-in Telligence Voice Command, the GMA 350H helps decrease pilot workload. Operate your audio panel without taking your hands off the controls. To switch between COMMs, just press a button and say “MIC 1” or “MIC 2.”
Distribute Audio in the Cockpit
The GMA 350H makes in-flight entertainment easy. Permanently wire 2 dedicated input sources into the rear connectors, such as an XM receiver and an auxiliary music device. Plug your portable audio devices (such as MP3 players or mobile phones) into the 3.5 mm jack on the front. Control which headset positions have access to which audio sources with the “blue-select” mode so your passengers can enjoy music while you listen to radio communications or make private full-duplex telephone calls. The intuitive front panel layout features cursor control and volume indicator for easy operation.
Advanced Auto Squelch & Automatic Volume Control
Advanced Auto Squelch automatically adapts to a quiet or noisy cockpit without clipping words or cutting out in the middle of phrases. An internal microphone also senses ambient noise and adjusts the cockpit speaker volume level accordingly. The system analyzes ambient noise level and adjusts volumes for the headsets (when configured to do so at the time of installation).
The GMA 350H offers 3 COMM support, as well as a flexible split COMM mode that lets the pilot and copilot to broadcast on separate COMMs. Split COMM support is available for positions 1/2, 1/3 or 2/3.
The system's green lighting is compatible with night-vision goggles. The automatic digital voice recorder continuously captures the last 2.5 minutes of audio for playback, so you can go back and listen if you miss an ATC call or frequency assignment.
Intuitive front panel layout with cursor control and volume indicator
6 to 7 position intercom: pilot, copilot, or 4 or 5 passengers
3 stereo headset amplifiers: pilot, copilot and passengers
2 stereo music source inputs
5 selectable intercom operational modes
Independent pilot, copilot and passenger volume controls
Individual VOX processing for each mic input
Automatic selection of radio audio source when corresponding mic is selected
Flexible split COMM transceiver function. Copilot may transmit and receive on one COMM while pilot transmits and receives on another.
Automatic audio adjustment for ambient noise
Marker beacon receiver with lamp driver outputs
Physical & Performance
6.25”W x 1.30”H x 7.80”D (15.9 x 3.3 x 19.8 cm)
2.4 lb (1.1 kg)
dedicated full-duplex tel interface (no PTT keying required)
ICS (intercom system)
6 to 7 position intercom (individual VOX processing for each mic position)
ICS isolation modes
5 - All, Pilot, CoPilot, Crew/Pass, None
3 - COM1, COM2, COM3
Additional receiver inputs
5 - NAV1, NAV2, AUX1, AUX2, AUX3
Music source input
1 stereo music source input
Music input impedance
rear pins: 600 Ohms; front panel jack: 5 kOhms
Music frequency response
20Hz - 20kHz
28V aircraft — 10W into 4 Ohms, 7W into 8 Ohms; 14V aircraft — 3W into 4 Ohms
pilot selectable — requires pressing and holding SPKR button to change state