Part Number: 010-00994-03
Estimated availability is 1 – 3 business days.
Find a Dealer


Pedal-based Power Meter

  • Easy to buy, install and own
  • Reliable, accurate performance data
  • Measures total power, left/right balance and cadence
  • Compatible with Edge® devices and Forerunner® multisport watches¹
  • See power metrics and graphs in Garmin Connect™

Measure Where It Matters

Vector Minisite

Vector changes how power is measured and how cyclists get power. Vector measures power at the pedal, where force is applied. It’s a direct-measurement power meter that delivers reliable, accurate data. Because the force sensors are housed in each pedal, Vector gives you the unique ability to see right and left leg power independently.

Easy to Buy, Install, Own

Vector Ownersite

In the past, power meters were difficult to install and often involved making mechanical tradeoffs for your bike. But with Vector, you can walk into your local bike shop, purchase a Vector power meter, and then install it yourself in minutes. There’s no need for a mechanic, or no downtime while your bike is in the shop. There are no complex drivetrain or wheel tradeoffs, or no external sensors to install.

With additional crank arm clearance — in thickness and width — Vector fits almost any bike. The standard pedal pods fit crank arms 12–15 mm thick and 44 mm wide. The large pedal pods fit crank arms 15–18 mm thick and up to 44 mm wide.

Retrieving product data...

Behind the Watts

Vector works by measuring the deflection in the pedal spindle as you pedal. By comparing that measured deflection to a factory-calibration, Vector can determine how much force you’re applying to the pedal. It measures a few hundred times per second. Built-in accelerometers also measure your pedaling cadence. The force sensor and related electronics are permanently and securely sealed within the pedal spindle.

Complete Cycling Suite

Use a compatible device, such as Edge 500, 510, 800, 810, 1000 or Forerunner 910XT, to take your training to the next level. Vector measures total power, left and right leg power and cadence and sends the data to compatible Edge cycling computers or other ANT+ enabled devices¹. Get post-ride analysis, mapping, route planning and data sharing at Garmin Connect

¹See the Specs tab to see data that can be viewed on compatible devices.

WARNING: The maximum weight limit of the cyclist using the Vector system is 200 lbs (90 kg). Cyclists over this weight limit risk personal injury and property damage.


In the Box

What's in the Box:

  • Vector pedals
  • Pedal pods
  • Cleats and hardware
  • USB ANT Stick
  • Manuals


Vector System Specs

  • Battery life: 175 hours
  • Weight (approximate, per pedal):
    • Pedal: 5.4 oz (152 g)
    • Pedal pod: 0.81 oz (23 g)
    • Cleats and hardware: 1.34 oz (38 g)
    • Total per pedal: 7.51 oz (213 g)

Garmin Device Compatibility

Data Edge 810 Edge 800 Edge 510 Edge 500 Fr 910XT Fr 310XT
Total Power Yes Yes Yes Yes Yes Yes
L/R Datafield %/NP¹/TSS²/IF³ Yes Yes Yes Yes Yes No
Power Focussed Lap Display Yes Yes Yes No No No
Calibration Guidance Yes No Yes No No No

¹Normalised Power™ (TrainingPeaks)

²Training Stress Score™ (TrainingPeaks)

³Intensity Factor™ (TrainingPeaks)


Compatible Devices